DataLink GW1000-DHPM

Modbus RTU to AB’s DH+ Multi-Protocol Converter $1,250 USD List

Applications include interfacing Modbus RTU / ASCII  intelligent devices, sensors and instruments to Allen-Bradley´s DH+.

 

 

GW1000 Gateway

The GW1000 is a multi-protocol gateway that can easily be converted to several protocols with a firmware change (ie. DF1, ASCII, Modbus, ModTCP, AB Ethernet or Ethernet/IP to multiple DH+/DH-485) all for $1,250 USD list.

You may wish to connect your Modbus RTU devices to DH+ or change firmware to RSLINX (AB Ethernet driver) remotely over Ethernet with our GW1500-ABEIP firmware.

GW1000-DHPM: Modbus to DH+ Gateway

The GW1000-DHPM provides high speed interconnectivity between Modbus RTU devices and Allen-Bradley’s DH+ Network.  The GW1000-DHPM can be configured into either Modbus Master or Modbus Slave modes.

Master Mode:  is used when a device on the DH+ network is going to initiate all communications with one or many Modbus slave devices.

Master mode enables any DH+ station to read / write up to 100 words (per message) to any 4xxxx or 0xxxx register, and to read up to 100 words from the 1xxxx and 3xxxx registers at any Modbus Slave address from 1 to 255.

Slave mode: is used when a Master device on Modbus network is going to initiate all communications with one or many SLC’s, PLC’s or other DH+. It is assumed that a PLC, SLC or other DH+ device can originate commands to Modbus via a GW1000 in master mode, or responding to Modbus commands via a GW1000 in slave mode.

Only devices capable of transmitting DH+ message commands in PLC5 (or PLC3) format and able to receive DH+ message commands in PLC5 format can be used with the GW1000-DHPM including SLC’s, MicroLogix’s, ControlLogix’s, HMIs and other intelligent devices.

Slave mode enables a Modbus Master to read or write up to 1600 coils or 100 registers (per message) to bit or integer files in any PLC-5 station on DH+ (except 0). Modbus commands to address 0 can be “broadcast” to a selected range of DH+ stations.

For more details: Application Notes & User’s Manual

Highlights:

Protocol Flexibility: The GW1000  is a multi-protocol gateway that can be easily converted between DF1, ASCII, Modbus, ModTCP, AB Ethernet or Ethernet/IP to DH+ or DH-485 with a simple firmware change.

Flexible Serial Interfacing:  RS232C (RS422/RS485 options available)

Multiple Modbus Protocols:  Master, Slave, RTU and ASCII

Compact and Lightweight: Palm-size, portable freestanding Din Rail/desktop controller with USB, AC/DC power option. Size and portability makes it convenient for use in the office, the plant floor, or when travelling.

Easy Configuration: All setup &  configuration is done via Web screen or Telnet.

Cost efficient Alternative:  All protocols are available in one GW1000 Gateway for $1,395 USD list.

For more details, discount pricing, or to find out if this solution is suitable for your application, please contact us.

Specifications:

Physical Dimensions Size: 0.90″ H x 4.65″ D x 3.98″ W (22.8mm x 118.3mm x 101.0mm) Weight: 0.66lbs (0.3kg) Power: 9-27 VDC; Less than 2 WattsInstallation Plastic enclosure; Freestanding or DIN rail mounting with integrated clipEnvironment Operating: +32 F to 122 F (0C to +50 C) Storage: -40 F to +185 F (-40C to +85C) Humidity: 5% to 95% non-condensing Protocols A-B Channel: Allen-Bradley Data Highway Plus Ethernet Channel: TCP/IP – 100-Base-T  Ethernet/IP, AB Ethernet, ModTCP Serial Channel: Modbus, DF1, ASCIICommunications A-B Channel: Synchronous, DH+ at 57.6, 115.2, and 230.4 Kbaud Ethernet Channel: 100-Base–T; TCP/IP

Configuration Integrated web server for configuring communications parametersIndicators Power DH+ status Serial Status Serial RX Serial TX Ethernet Activity Ethernet Link Pushbuttons Reset ConfigurationHardware Connections – Top - 3-pin power – 3.81mm pitch removable screw terminal plug - 3-pin A-B DH+/RIO – 5.08mm pitch removable screw terminal plug - RJ45- Ethernet Connections – Bottom - 5-pin RS485/RS422 – 3.81mm pitch removable screw terminal plug - D9 – RS232 port - USB