Buffer
 

GW1000-DH485A – $1,250 List.

Ascii to DH-485 Network (DH-485 Ascii)

 

The DataLink GW1000-DH485A is a compact, DinRail ASCII Gateway to A-B DH-485 network protocol. It provides an ASCII interface to PLC’s on the DH-485 Network for printers, bar code scanners, and other ASCII devices.

In Scanner operation the ASCII data is stored in the buffer until either a terminating character (CR, LF, CR & LF) or 240 bytes are received. The packet of ASCII data is then sent to an integer file in the PLC.

In Printer operation, data stored in PLC ASCII files can be outputted to printers or message displays with a simple write command to the GW1000.

Serial Interfacing
CHA – RS232, RS422 and RS485 Interface to DF1 (Full Duplex) device (SLC CH0)
CHB – DH-485 Non Isolated Interface
CHC – Future use

Specifications:
Physical Dimensions
Size: 0.90″ H x 4.65″ D x 3.98″ W (22.8mm x 118.3mm x 101.0mm)
Weight: 0.66lbs (0.3kg)
Power: 9-27 VDC; Less than 2 WattsInstallation
Plastic enclosure; Freestanding or DIN rail mounting with integrated clipEnvironment
Operating: +32 F to 122 F (0C to +50 C)
Storage: -40 F to +185 F (-40C to +85C)
Humidity: 5% to 95% non-condensing

Protocols
A-B Channel: Allen-Bradley Data Highway Plus or Remote I/O
Ethernet Channel: TCP/IP – 100-Base-T
Serial Channel: DF1 Communications
A-B Channel: Synchronous, DH+/RIO at 57.6, 115.2, and 230.4 Kbaud Ethernet Channel: 100-Base–T; TCP/IP		 Configuration
Integrated web server for configuring communications parameters.Indicators
Power
DH+ status
Serial Status
Serial RX
Serial TX
Ethernet Activity
Ethernet Link Pushbuttons
Reset
ConfigurationHardware
Connections – Top
- 3-pin power – 3.81mm pitch removable screw terminal plug
- 3-pin A-B DH+/RIO – 5.08mm pitch removable screw terminal plug
- RJ45- EthernetConnections – Bottom
- 5-pin RS485/RS422 – 3.81mm pitch removable screw terminal plug
- D9 – RS232 port
- USB